- Raw Material Storage
- ↓ Sand Drying & Screening
- ↓ Automatic Batching
- ↓ Mixing
- ↓ Finished Product Storage
- ↓ Packaging
- ↓ Palletizing
- ↓ Warehouse
Plastering Mortar Production Line
Advanced mixing technology: twin-shaft non-gravity mixer with fast mixing speed and wear-resistant mixing blades for long-term stable operation.
Features:
- Flexible capacity range: 10–170 tons per hour
- High cost-performance ratio: simple formula, wide raw material adaptability, short payback period.
- Application scope: Ordinary mortars: floor mortar, masonry mortar, plastering mortar, etc.Special mortars: tile adhesive, interior & exterior putty powder, grout (white/black/gold), thermal insulation mortar, etc.
Build A Profitable Masonry Mortar Manufacturing Business
Produce High-Strength Brick Laying Mortar With Stable Quality And Lower Production Cost
✓ 5-100 TPH Capacity ✓ Automatic Formula Control ✓ Consistent Bonding Strength ✓ Reduced Labor Cost ✓ Free Plant Layout Design ✓ Installation & Training Support ✓ Capacity Guarantee Program
What Is A Masonry Mortar Production Line?
A masonry mortar production line is an automated manufacturing system designed to produce dry mixed mortar used for brick laying, block construction and masonry work.
The production process includes:
- Sand drying
- Raw material storage
- Automatic weighing
- Precise batching
- High-efficiency mixing
- Packaging
- Palletizing
The finished products are widely used in residential buildings, commercial projects, industrial facilities and infrastructure construction.
Why Is Masonry Mortar In High Demand?
With the rapid growth of construction projects worldwide, demand for factory-produced masonry mortar continues to increase.
Compared with traditional site-mixed mortar:
- Better Quality Consistency
Every batch follows the same formula. - Higher Construction Efficiency
Ready-to-use products reduce on-site preparation time. - Lower Material Waste
Accurate formulation minimizes raw material loss.
- Improved Bonding Strength
Provides stronger adhesion for bricks and blocks. - Cleaner Construction Sites
Reduces dust and environmental pollution.
Common Problems Faced By Mortar Manufacturers
Many manufacturers encounter challenges such as:
- Inconsistent Product Strength
- Rising Labor Costs
- Dust Pollution
- Poor Formula Accuracy
- Low Production Efficiency
Tongding Masonry Mortar Production Line is designed to eliminate these production bottlenecks.
Advantages Of Tongding Masonry Mortar Production Line
- Precise Formula Control
Automatic weighing system ensures stable mortar strength and water retention. - Excellent Mixing Uniformity
Mixing uniformity exceeds 99%, ensuring consistent product quality. - Lower Production Cost
Automated production significantly reduces labor requirements. - Suitable For AAC Block Mortar
Supports specialized mortar formulations for modern lightweight block construction.
- Flexible Formula Switching
Quickly change recipes for different mortar products. - Dust-Free Production
Integrated dust collection system improves workshop conditions. - Intelligent PLC Control
Simple operation and real-time production monitoring. - One-Stop Factory Solution
Design, manufacturing, installation and training services included.
Products That Can Be Manufactured
Brick Laying Mortar Cement Masonry Mortar AAC Block Mortar Concrete Block Mortar Lightweight Block Mortar High Strength Masonry Mortar General Construction Mortar Dry Mixed Mortar
Production Process
Global Applications
Our masonry mortar production lines are widely used in:
Saudi Arabia UAE Oman Qatar Kazakhstan Uzbekistan Indonesia Philippines Malaysia Vietnam Nigeria South Africa
Successful Masonry Mortar Projects
20 TPH Brick Mortar Plant In Saudi Arabia
Used for large-scale housing construction projects.
30 TPH AAC Block Mortar Plant In Uzbekistan
Specialized mortar production for lightweight block systems.
50 TPH Masonry Mortar Factory In Indonesia
Integrated drying, mixing and packaging solution.
Frequently Asked Questions
- What Is The Difference Between Masonry Mortar And Plastering Mortar?
Masonry mortar is mainly used for brick and block bonding, while plastering mortar is used for wall rendering and surface finishing. - Can One Production Line Produce Different Mortar Products?
Yes. Formula parameters can be adjusted to manufacture masonry mortar, tile adhesive, plastering mortar and other dry mix products. - What Capacity Is Available?
From 5 TPH to 100 TPH or customized solutions. - How Many Workers Are Needed?
Typically 3-6 operators depending on automation level. - Can You Provide Installation Service?
Yes. Overseas installation and commissioning support are available.
Get Your Free Masonry Mortar Factory Design
Send Us:
- Required Capacity
- Product Formula
- Factory Area
- Country
- Raw Material Information
You Will Receive Within 24 Hours:
- ✓ Free Layout Drawing
- ✓ Equipment Configuration
- ✓ Production Flow Diagram
- ✓ Investment Budget Analysis
- ✓ D#etailed Quotation
Applicable Materials
Dry Mortar
Cementing Material
Putty Powder
Grouting Material
Masterbatch
Additive
Vitrified Microsphere
Hot Melt Marking Coating
Plastering Gypsum
Specifications
| Model | Capacity(T/H) | Power（KW） | Volume(m3) | Load Factor | Dimension(L*W*H, mm) |
| WSZ2 | 10-15t/h | 18.5 | 2 | 0.4-0.6 | 2460*1640*1520 |
| WSZ3 | 15-25t/h | 22 | 3 | 2850*1640*1520 | |
| WSZ4 | 25-40t/h | 30 | 4 | 2800*2110*1950 | |
| WSZ6 | 60-120t/h | 45 | 6 | 3130*2470*2120 | |
| WSZ10 | 100-170t/h | 55 | 10 | 3600*3000*2510 |
Related Products
Masonry Mortar Production Line
Fully automatic masonry mortar production line 5-100 TPH. PLC control, sand drying, twin shaft mixer, packing, palletizing. Low labor cost, high uniformity. Custom layout, installation, 5-year warranty. Get free quote.
Floor Mortar Production Line
Floor Mortar Production Line designed for self leveling mortar and floor screed mortar manufacturing. Suitable for automatic dry mix mortar production with stable capacity and low operating cost. Compact structure, precise batching system and intelligent control improve production efficiency and reduce labor requirements. Turnkey plant solution with installation guidance, formula support and 5-year warranty.
Tile Adhesive Production Line
Tile Adhesive Production Line for 5-60T/H automatic dry mortar production. Suitable for tile adhesive, wall putty, skim coat and thermal insulation mortar. Compact structure, stable output, low labor cost and customizable layout for different factory sizes. Support turnkey solution, installation guidance and global project service.
Sand Dryer Production Line
Drying: Through disk feeder and wet sand belt conveyor, feed wet sand from moist-material bin to rotary dryer for drying, heated by gas combustion chamber.
Thermal Insulation Mortar Production Line
Thermal Insulation Mortar Production Line designed for automatic dry mortar production with stable capacity and low operating cost. Suitable for thermal insulation mortar, lightweight mortar, wall putty and tile adhesive manufacturing. Compact structure, intelligent control system and customizable layout for different factory sizes. Turnkey plant solution with installation support, formula guidance and 5-year warranty.
