Tile Adhesive Production Line
Tongding provides complete Tile Adhesive Production Line, Tile Adhesive Manufacturing Plant, and Dry Mix Mortar Plant solutions from 5 TPH to 170 TPH+. The service comes with a 5-year warrantyand a 100% refund if the production volume fails to meet the standards.
Features:
- Capacity: 5–170 TPH Customized Production Lines
- Application: Tile Adhesive • Wall Putty • Skim Coat
- Automation: Fully Automatic PLC Control
- Turnkey Solution: Layout • Installation • Training
- Service: Lifetime Technical Support & Formula Guidance
Tile Adhesive Production Line
Complete Turnkey Solution for Efficient Tile Adhesive Manufacturing
Design, manufacture and install fully automatic tile adhesive production lines from 5–100 TPH, helping building material manufacturers produce high-quality C1, C2, C2TE, polymer-modified and waterproof tile adhesives with stable quality and lower operating costs.porcelain floor tile adhesive manufacturer in china.
Successful Project Case
Dominican Republic Tile Adhesive Manufacturing Plant
Equipment: Dry Mortar Production Line, Sand Dryer, Storage Silos, Packaging System
Capacity: 30-60 TPH
Products: Tile Adhesive, Dry Mix Mortar, Self-Leveling Mortar
Customer Benefits: ✔ Reduced labor costs by 40% ✔ Increased production efficiency ✔ Improved product consistency ✔ Expanded local market share
📌 Click to expand all FAQs (5 questions)
Yes to both. One line can produce AAC Block Adhesive, Tile Adhesive, Wall Putty, Skim Coat, Masonry Mortar, Plaster Mortar, Self-Leveling Mortar, Gypsum Mortar, and Dry Mix Mortar – with one-click recipe switching via PLC control.
The PLC system supports multiple formula storage and management, allowing you to customize and switch between different product recipes quickly and accurately.
In most cases, yes. If the moisture content of the raw sand is above approximately 0.5–1%, a sand drying system is recommended.
Tongding supplies complete rotary sand drying systems with capacities from 3 TPH to over 100 TPH, supporting multiple heat sources:
- Diesel
- Natural Gas
- LPG
- Heavy Oil
- Biomass
- Coal (where permitted)
We recommend selecting the burner according to local fuel availability and operating costs.
Yes. River sand, sea sand, and silica sand are all applicable.
- River sand – most commonly used; should be washed, screened, and dried before use.
- Sea sand – requires washing, desalination, drying, and screening to remove salt and chloride for durability.
- Silica sand – ideal for premium products due to high purity and stable particle size.
A fully automatic line typically requires 2–4 operators, while a semi-automatic plant usually needs 5–8 operators, depending on the production capacity and configuration.
We provide a 5-year warranty on major components, plus:
- Lifetime technical support
- Spare parts supply
- Remote assistance
- Overseas installation & commissioning services
Yes, we provide formula support. We offer basic formula guidance and recipe support for:
- Tile Adhesive
- Wall Putty
- Skim Coat
- Masonry Mortar
- Plaster Mortar
- Self-Leveling Mortar
6. How much does a tile adhesive production plant cost?
The cost depends on production capacity, automation level, mixer configuration, number of storage silos, packaging system and optional equipment...
Our engineering team can also help optimize formulations based on your local raw materials.You can also refer to this:tile adhesive manufacturing process
Applicable Materials
Dry Mortar
Cementing Material
Putty Powder
Grouting Material
Masterbatch
Additive
Vitrified Microsphere
Hot Melt Marking Coating
Plastering Gypsum
Specifications
| Model | Capacity(T/H) | Power（KW） | Volume(m3) | Load Factor | Dimension(L*W*H, mm) |
| WSZ2 | 10-15t/h | 18.5 | 2 | 0.4-0.6 | 2460*1640*1520 |
| WSZ3 | 15-25t/h | 22 | 3 | 2850*1640*1520 | |
| WSZ4 | 25-40t/h | 30 | 4 | 2800*2110*1950 | |
| WSZ6 | 60-120t/h | 45 | 6 | 3130*2470*2120 | |
| WSZ10 | 100-170t/h | 55 | 10 | 3600*3000*2510 |
Related Products
Automatic Wall Putty Production Line
Tongding Automatic Wall Putty Production Line is designed for the efficient production of interior wall putty, exterior wall putty, waterproof putty, skim coat, and polymer-modified putty products. The complete system integrates automatic batching, conveying, mixing, packing, and PLC control, helping manufacturers improve productivity, reduce labor costs, and maintain stable product quality. Capacities range from 5 TPH to 100 TPH with customized turnkey solutions available.
Floor Mortar Production Line
Floor Mortar Production Line designed for self leveling mortar and floor screed mortar manufacturing. Suitable for automatic dry mix mortar production with stable capacity and low operating cost. Compact structure, precise batching system and intelligent control improve production efficiency and reduce labor requirements. Turnkey plant solution with installation guidance, formula support and 5-year warranty.
Mini-type Dry Mortar Mixing Production Line
Mini-type Dry Mortar Mixing Production Line designed for small and medium mortar factories with low investment and stable production capacity. Suitable for tile adhesive, wall putty, skim coat and dry mix mortar manufacturing. Compact design saves factory space and reduces labor cost. Easy operation, customizable configuration and turnkey plant support with installation guidance.
Thermal Insulation Mortar Production Line
Thermal Insulation Mortar Production Line designed for automatic dry mortar production with stable capacity and low operating cost. Suitable for thermal insulation mortar, lightweight mortar, wall putty and tile adhesive manufacturing. Compact structure, intelligent control system and customizable layout for different factory sizes. Turnkey plant solution with installation support, formula guidance and 5-year warranty.
